At Sigenergy, we strive to provide innovative and reliable EV charging solutions that meet the needs of our customers. Our Sigen EV AC Charger offers green power charging, advanced features such as data tracking and scheduled charging, dynamic load management, and integrated residual current failure protection. In this article, we will address the question: "How to hardwire EV charger?" and provide a comprehensive guide to help you successfully hardwire your charging solution.

Understanding the Process: How to Hardwire EV Charger

Hardwiring an EV charger involves a direct electrical connection to the power supply, eliminating the need for a plug and socket. Here are the steps to successfully hardwire your EV charger:

Disconnect power: Before starting the electrical work, ensure that the power to the circuit is disconnected. It is crucial to ensure that there is no electricity running through the circuit.

Verify circuit breaker rating: Check that the rating of the circuit breaker is suitable for the EV charger unit. If the charger has a maximum rated current output of 48A, make sure it is being installed on a 60A circuit. The charger is typically preconfigured for this setting, so if you have a 60A circuit, proceed to the next step.

Connect the charger to power:Now, it's time to connect the EV charger to power. Use the supplied conduit and connectors to run field wiring in an NEC-approved conduit system from the circuit to a junction box located within 3 feet of the mounted EV charger. In this junction box, the pre-wired EV charger will be connected to the field wiring from the circuit.

Sigenergy's Sigen EV AC Charger: Designed for Easy Hardwiring

Our Sigen EV AC Charger is designed to simplify the hardwiring process, ensuring a hassle-free installation experience. Here are some notable features:

Enhanced Safety:The Sigen EV AC Charger prioritizes your safety with integrated residual current failure protection. This feature safeguards against electrical faults, providing an additional layer of protection for both you and your vehicle. Charge with peace of mind, knowing that safety is a top priority.

Top/Bottom Entry Option: Our charger provides the flexibility of top or bottom entry, allowing you to choose the most suitable routing option for your specific installation needs.

Conclusion

At Sigenergy, we understand the importance of a seamless installation process for EV chargers. Hardwiring your EV charger requires careful consideration and expert knowledge. Remember to consult a qualified electrician, turn off the power, connect the wires correctly, and secure the junction box.

Sigenergy offers a range of advanced EV charging solutions, including the Sigen EV AC Charger, designed to meet your charging needs. With features such as green power charging, data tracking, scheduled charging, dynamic load management, and integrated residual current failure protection, our products provide a reliable and efficient charging experience.